Why Does Mold Keep Appearing in My Washing Machine?

By Missy Nolan

August 07, 2024

Yuck! Something stinks in your laundry room, and it's not your son's gym socks or your pet's beloved blanket. After sniffing it out, you discover the culprit: mold in the washing machine. Or maybe you can't find any fungus, but you suspect you have mold in the washer.

This May Also Interest You: What Do You Do With an Old Appliance? How to Recycle Fridges, Washers, Ovens and More

Either way, you're in the right place. Here's how to suss out the source of the mold, and how to get it gone for good.

Why Does Mold Grow Inside My Washing Machine?

Your washing machine may be a breeding ground for mold because it's dark and damp environment, and it's constantly handling dirt. This is true whether you have a high-efficiency, top-loading or front-load washer. Here are some common reasons you may keep finding mold in a washing machine.

Excess Detergent

Less is more when it comes to detergent, so follow the brand's instructions instead of measuring with your heart. Using too much detergent won't get your clothes any cleaner; in fact, it may cover them — and your washer — with a grimy residue. This thick coating traps bacteria in your washer, creating a feast for mold and mildew.

Poor Ventilation

Mold loves humidity, so leave the door open when you aren't running the washer. Otherwise, the lack of air circulation in your closed washing machine may trap bacteria-promoting moisture inside, leading to mold or mildew.

Cold Water

Washing clothes in cold water can lower your utility bills, but it may add another expense to your household's budget: mold control. Cold water typically doesn't remove mold, so use the hot water setting if you suspect fungus lurks in your washing machine. Make sure your water is at least 140 degrees Fahrenheit to help thwart mold growth in your washer.

Improper Loading

It can be tempting to jam all the laundry you can fit into a washing machine, but resist the urge. Overcrowding your washer makes it hard for soap and water to move freely during a cycle. Detergent may build up on your washer's walls or in hidden crevices, encouraging mold formation. Overloading your washer can also damage its motor and gaskets, making it harder to clean properly.

Problems With Parts

When washer parts malfunction or need maintenance, you may end up with mold. The rubber gasket, which is located between the drum and door of front-load washers, can trap excess water if you don't clean it regularly. You should also check the seal around the top of your washer, if applicable. Examine your entire washer regularly, as mold can form anywhere, including under the lid, in or around the drain, behind the door or on the drum.

How Do You Remove Mold From a Washing Machine?

Mold removal may seem intimidating, but it can often be done without the help of a professional. You can remove mold from a top-loading washing machine with bleach, vinegar or hydrogen peroxide. The same methods can work for front-loading washing machine mold as well. Make sure you run the clean cycle with hot water regardless of the method you choose.

Check your washing machine's user manual for tips on mold removal. If you don't see any, consider the following options.

Vinegar and Baking Soda

Combine 1/4 cup of baking soda with 1/4 cup of white vinegar and pour the cleaning solution in your machine's detergent dispenser. Add 2 cups of water to the washer's drum and run the clean cycle with hot water.

Hydrogen Peroxide

Mix 2 cups of water with 1/2 cup of hydrogen peroxide and 1/4 cup of lemon juice to create a cleaning solution. This mixture can effectively remove mold from gaskets, washer lids and washer doors.

Bleach

Mix 1 cup of bleach with 4 cups of water and add the mixture to your washer. Then, run the cleaning cycle. This can help remove mold and mildew in a washing machine, but keep in mind that bleach doesn't kill mold's spores like vinegar.

Tips for Getting Rid of Mold and Mildew

Avoid mixing commercial cleaning solutions or substances, even if you're using natural mold removal solutions. Bleach can create toxic fumes when it combines with hydrogen peroxide or other incompatible substances.

Wipe down your machine with hot, soapy water first, taking care to get the edges and any hard-to-reach crevices. After that, wipe each section with water to remove any soap residue before adding other substances, such as vinegar or hydrogen peroxide, to your washing machine.

Consult an appliance professional if DIY attempts at mold removal fail.

More Related Articles:

How Do I Prevent Mold Growth in My Washing Machine?

If you've finally gotten rid of mold in a washer or hope you never find fungus in your appliance, you may have questions about mold prevention. You can help keep mold from growing by leaving your washing machine door open when the machine is empty. When you wash clothes, avoid overloading your machine. You can also run a clean cycle with bleach, hydrogen peroxide or vinegar once or twice a month to help prevent mold-attracting residue from forming.

View Plans in Your Area
Search Icon

Sign up for HomeServe emails!

Get the latest news, tips and promotional messages, including special offers.