30 Day Money Back Guarantee
-
Why Choose this Plan
Repairing a blower motor and wheel, fan/limit control switch and gas valve on your heating unit can cost an average of $1,637‡.
How a furnace heating system failure can affect your home:
- blower motor failure can mean the system won't supply enough heat
- broken circuit board could mean no heat
- lack of heat could cause pipes to freeze and induce water damage
As a homeowner, you are responsible for the heating system inside your home, and you will have to arrange and pay for any necessary repairs. This illustration shows a typical heating system found in your home. ‡National average repair costs as of December 2024. No charge for covered repairs up to your service call benefit amount.
-
What's Covered
- Check thermostat operation
- Check system temperature split
- Check voltage and amperage to all motors
- Inspect disconnect
- Inspect fuses, wiring, and contactors
- Inspect relays and pressure controls
- Inspect electrical safety circuits
- Inspect indoor blower and motor for dirt buildup
- Inspect duct seal at unit, secure panels and bearings
- Clean burner and condensate line
- Run and test system
-
Overview
A heating system tune-up/maintenance check lets you rest easy knowing your system is running at peak performance and can help identify potential problems before they become larger issues.
Get peace of mind knowing your annual heating system maintenance is taken care of with a plan from HomeServe. -
Benefits
Why choose this plan:
- $500 annual benefit amount
- 1 service calls ($500 per call)
- 30-day review period
- One-year guarantee on all covered repairs
Important coverage information
Eligibility: To be eligible, you must own the residential single structure or a unit within a structure. You are not eligible if your home is a recreational vehicle or otherwise intended to be moved; your property is used for commercial purposes; you know of any current problems with your system before enrollment; your system is shared with a 3rd party or covered by a homeowners’ association or the like; is not installed according to code or manufacturer specifications; has a furnace or boiler rated at inputs of 400,000 Btu/hr. or more; is installed on a roof, is a through-the-wall, hanging, geothermal heat pump, combination ambient heat/domestic hot water heating or oil unit.
Benefit Details: One tune-up for a fully functioning central forced-air furnace or circulating hot water system fueled by natural gas, propane, or electricity, for which you have sole responsibility. A tune-up includes the following: Check: thermostat operation; system temperature split; voltage and amperage to all motors. Inspect: disconnect; fuses; wiring; contactors; relays and pressure controls; electrical safety circuits; indoor blower and motor for dirt buildup; condensate drain; burners; duct seal at unit and secure panels; and bearings. Clean (if necessary): burner; condensate line and air filter. Replace: Air filter (customer-supplied). Lubricate: fan and motor units. Run and test system. Technicians must have safe access to the work area.
Not covered: Repair or replacement of any sections or parts of your system. Any maintenance work (including cleaning heat exchangers) not included in a Tune-Up. Additional exclusions apply. Disputes resolved by arbitration, without class action or jury trial, unless otherwise stated in your full Terms and Conditions.
Making a service call: You are entitled to one annual cooling system tune-up, which must be scheduled by you. You can schedule your annual tune-up immediately after your plan starts.
Cancellation: Cancel any time by calling HomeServe or visiting www.homeserve.com/cancel.
Renewal: The plan is annual. Unless you cancel, your plan automatically renews annually at the then-current renewal price with your same payment terms.
Benefit Details: One tune-up for a fully functioning central forced-air furnace or circulating hot water system fueled by natural gas, propane, or electricity, for which you have sole responsibility. A tune-up includes the following: Check: thermostat operation; system temperature split; voltage and amperage to all motors. Inspect: disconnect; fuses; wiring; contactors; relays and pressure controls; electrical safety circuits; indoor blower and motor for dirt buildup; condensate drain; burners; duct seal at unit and secure panels; and bearings. Clean (if necessary): burner; condensate line and air filter. Replace: Air filter (customer-supplied). Lubricate: fan and motor units. Run and test system. Technicians must have safe access to the work area.
Not covered: Repair or replacement of any sections or parts of your system. Any maintenance work (including cleaning heat exchangers) not included in a Tune-Up. Additional exclusions apply. Disputes resolved by arbitration, without class action or jury trial, unless otherwise stated in your full Terms and Conditions.
Making a service call: You are entitled to one annual cooling system tune-up, which must be scheduled by you. You can schedule your annual tune-up immediately after your plan starts.
Cancellation: Cancel any time by calling HomeServe or visiting www.homeserve.com/cancel.
Renewal: The plan is annual. Unless you cancel, your plan automatically renews annually at the then-current renewal price with your same payment terms.
Frequently asked questions
What's covered?
One tune-up for a fully functioning central forced-air furnace or circulating hot water system fueled by natural gas, propane, or electricity, for which you have sole responsibility. A tune-up includes the following: Check: thermostat operation; system temperature split; voltage and amperage to all motors. Inspect: disconnect; fuses; wiring; contactors; relays and pressure controls; electrical safety circuits; indoor blower and motor for dirt buildup; condensate drain; burners; duct seal at unit and secure panels; and bearings. Clean (if necessary): burner; condensate line and air filter. Replace: Air filter (customer-supplied). Lubricate: fan and motor units. Run and test system. Technicians must have safe access to the work area.
What's not covered?
Repair or replacement of any sections or parts of your system. Any maintenance work (including cleaning heat exchangers) not included in a Tune-Up. Additional exclusions apply.
When can I schedule a Tune-Up?
You are entitled to one annual heating system tune-up, which must be scheduled by you. You can schedule your annual tune-up immediately after your plan starts.
HomeServe USA Repair Management Corp. ("HomeServe"), with corporate offices located at 601 Merritt 7, 6th Floor, Norwalk, CT 06851, is an independent company separate from CenterPoint Energy and offers this optional service plan as an authorized representative of the contract issuer, National Home Repair Warranty, Inc., 59 Maiden Lane, 43rd Floor, New York, NY 10038. Your choice of whether to purchase this plan will not affect the price, availability or terms of service from CenterPoint Energy. CenterPoint Energy and HomeServe entered into an agreement to introduce these plans to CenterPoint Energy’s customers.
Heating Tune-Up for only $9.99/mo.