Not washed for two weeks? People in the office avoiding you? There's no need to suffer in silence as our help and advice will have your hot water supply up and running in no time!
As always, take great precautions with any inspection or work involving electricity and remember to:
- Switch off the power and remove the fuse for the relevant circuit before undertaking any work
- Never inspect or carry out work on any part of the system with the power on
- If you're at all unsure about what you are doing, engage the services of an expert electrican
What to do
The steps below should help you solve the problem fast:
-
Power supply and fuse
Check that the power supply is on and the fuse is working. If a fuse has blown, it may be symptomatic of something more serious.
-
Gas or oil supply
Check that the gas or oil supply is turned on.
-
Programmer is on
Check that the programmer is in the 'on' position and the thermostats are turned up high enough.
-
Pump running
Check if your pump is running. If not, it's best to call a professional electrical engineer as the repair will require professional expertise.
-
Pilot light
Check your pilot light. If it's switched off, relight it by following your manufacturer's manual.
Important information regarding our DIY help and advice
We try to make the advice on our website (www.HomeServe.com) as useful and reliable as possible. However, the purpose of this advice section of the website is to provide homeowners and private landlords with general guidance and useful tips only. It doesn't necessarily deal with every important topic or cover every aspect of the topics with which it deals and might not be relevant or appropriate in all circumstances. It is not designed to provide professional advice or financial advice and should not be relied on as such. Click here to read the disclaimer in full.